Derfoe silicone for vehicle is neutral curing and favorable elasticity
The silicone can be set and become solid under the normal temperature
Features:
Derfoe vehicle silicone is neutral curing. It has good flexibility and is suitable for exchanging position.The silicone is used widely at the Automotive industry and Repair Store. Especially for side glass of vehicle. floors in the bus lamp and a/c holders. Resists leaking damping and migrating caused by thermal cycling. Weatherpoof and uv-resistance Withstands both low and high temperature(250)
Main purpose:
Seal the side windows of vehicles.the floor inside of bus, roof part and A/C holders, vehicle lamp and cable connection
Standards:
Before condensation
Drop length: ≤3mm
Touch dry: <15
Deep drying speed: 1 to 2mm/day
All the data are tested at 25 and 50% humidity condition
After 7 days 25 and 50% humidity condition
Shore hardness: 35 (black), 20 (lucency)
Tensile strength: ≥1.20mPa
Maximum tensile: 300%
Terminal tensile: 450%
Heat resistance: -50 to +250 degrees
Storage:
Should be stored at the dry condition. Keep the warehouse temperature from 2 to 25 degrees Celsius. Last for 9 month.Better use it immediately after opening. for glass, aluminum plate, panel wall, steel configuration and slate
